Factory Defaults Settings
The following table identifies factory defaults settings for the MicroMax GPS300, GPS350, and GPS360 interrupters.
To reset the unit's settings using the interrupter's keypad, refer to Resetting to Factory Defaults with Keypad. To reset the unit's settings using Bullhorn Tools, refer to Resetting to Factory Defaults with Bullhorn Tools.
|
Setting |
Value |
|---|---|
|
Interruption |
Program 1: 3.0 / 1.0 Program 2: 0.8 / 0.2 Program 3: 3.0 / 1.0 Program 4: 4.0 / 1.0 Program 5: 12.0 / 3.0 Program 6: 15.0 / 5.0 Program 7: 0.7 / 0.3 Program 8: 0.8 / 0.2 Program 9: 9.0 / 3.0 |
|
Interference |
On: 13.0s Off: 5.0s Delay: 2.0s Cycle time: 88s Unit #01/10 |
|
Start Time |
Immediate |
|
Stop Time |
Never |
|
Output Parameters |
Switch: Normally Closed Interruption Cycle: On/Off |
|
UTC Offset |
UTC -06 |
|
Zero Crossing |
Disabled |