Custom Module Management (CMM) allows you to manage compliance data for facility types not included within a specific module of PCS or create an entirely new module with all new custom facility types. If there is an installed module that contains most, but not all, of the facility types you need, you can create a new custom facility type within the existing module. However, if your compliance data needs cannot be fulfilled at all by an existing module, you can create a custom module that contains only custom facility types.
Custom modules and facilities provides the same basic functionality as a system installed modules and facilities and can be used with the same PCS features as system installed modules and facility types. You can enter information, inspection, and maintenance data for custom facility types and perform the same tasks with data in the custom module as you would with data in a system installed module, including running reports, viewing and filtering data, and setting up schedules.
Custom Module Management
PCS supports up to ten (10) custom modules with each module supporting up to ten (10) custom facility types.
CMM is an optional add-on feature that requires an activation key for operation. If your company has purchased the CMM module, use the following information to set up a custom module and custom facility types:
To add a new custom module with custom facility type(s), refer to Add a Custom Module.
To edit or delete an existing custom module, refer to Modify a Custom Module.
To add a new custom facility type to an existing module, refer to Add a Custom Facility Type.
To edit or delete an existing custom facility type, refer to Modify a Custom Facility Type.
To finish setting up PCS to use the custom modules and facility types, refer to Configure PCS for the New Module or Facility Type