Modify a Custom Facility Type

Custom facility types that had been added to a system installed or custom module can be edited or deleted as desired. These instructions start with the assumption that the correct pipeline segments have been selected. For information detailing how to select pipeline segments, refer to Select ROWs.

Complete the following steps to edit or delete a custom facility type:

Select Custom Module Management from the Modules menu.
Select the module that contains the facility type you wish to modify.
Locate the facility type you wish to modify and do either of the following:
- Edit the Facility Type. Change the facility type's properties as needed by doing the following:
  - Type the facility type's name in the Name field. The field accepts up to 30 alphanumeric characters including spaces and special characters.
  - Type a longer name for the user defined facility in the Long Name field. This field accepts up to 40 alphanumeric characters including spaces and special characters.
  - Type an acronym for the user defined field in the Short Name field. The field accepts up to four (4) alpha characters. It does not support numeric or special characters.
  - If you want the facility type available for selection when setting up a schedule, click to select the Is Schedulable check box.
  - Click to select the Is Routable check box to have the facility type available for selection when setting up a route.
  - Click Save to save the current facility type's properties.
- Delete the Facility Type. Delete the facility type by doing the following:
  1. Click in the facility type's box.
  2. Review the confirmation dialog to ensure you still want to delete the custom facility type and click Delete to delete the facility type or Cancel to cancel the operation.
Click to close Custom Module Management.