Placement or Mounting Requirements

The RM4150 and RM4151 are designed to be installed inside the rectifier. The list below identifies conditions to consider before installing the unit. Magnets are included with the units for mounting on an available surface inside the rectifier.

RM4150/RM4151 Enclosure Dimensions

RM4150 and RM4151 Enclosure Dimensions

  • If the unit will be placed inside the rectifier, enough room should be available to place the unit to the back or front of the rectifier case so that it is not directly over the air vent. Enough room will also be needed for input wires that will be routed from the unit.

  • If the unit will be mounted inside the rectifier, mounting magnets are included and can be attached to the unit for easy mounting. See Mount the RM4150, RM4150S, RM4151, or RM4151S for more information.

    Magnetic Disk for Mounting RM4150

    Magnetic Disk for Mounting RM4150

  • The area should provide enough working space to easily access the unit to wire inputs, configure the unit for service using the Bullhorn Tools software, or perform routine maintenance.