Mount the RM4150, RM4150S, RM4151, or RM4151S

The following section explains how to mount the RM4150, RM4150S, RM4151, or RM4151S enclosure using the optional mounting magnets.

Mounting Magnetic Disks to Back of Unit

Complete the following steps to mount the unit using the four (4) magnetic disks, screws, and nuts from the accessory kit.

1. Thread a screw through each magnetic disk.

2. Attach a disk to each corner of the unit.

3. Tighten nut onto screw as shown in the image above.

4. Use a Phillips head screwdriver to tighten screw and secure magnetic disk to unit case.

5. Mount the enclosure on an available surface inside the rectifier.