Data Alert Condition Operators and Trigger Values
An alert is a condition of interest indicating the status of a unit. Data alerts send notifications of an alarm event for a data point.
The following table provides a description of available Operators and the corresponding Trigger Value (if available) for data alert conditions (refer to Add Conditions to an Alert. for details on creating this type of alert).
For some Trigger Values, an engineering unit displays next to the Trigger Value field. After you save the new Condition, the engineering unit value is then displayed in the Eng. Units column in the Conditions tab.
|
Operator |
Description |
Trigger Value |
|---|---|---|
|
!=Not Equal To |
The condition of the data point is not equal to the Trigger Value assigned. |
ON/OFF or numerical value |
|
< Less Than |
The condition of the data point is less than the Trigger Value assigned. |
Numerical value. |
|
<= Less Than or Equal To |
The condition of the data point is less than or equal to the Trigger Value assigned. |
Numerical value |
|
== Equal To |
The condition of the data point is equal to the Trigger Value assigned. |
ON/OFF or numerical value |
|
> Greater Than |
The condition of the data point is greater than the Trigger Value assigned. |
Numerical value |
|
>= Greater Than or Equal To |
The condition of the data point is greater than or equal to the Trigger Value assigned. |
Numerical value |
|
Changes Less Than |
The condition of the data point changes less than the Trigger Value assigned. |
Numerical value |
|
Changes Less Than % |
The condition of the data point changes less than (in percentage) the Trigger Value assigned. |
Numerical value |
|
Changes More Than |
The condition of the data point changes more than the Trigger Value assigned. |
Numerical value |
|
Changes More Than % |
The condition of the data point changes more than (in percentage) the Trigger Value assigned. |
Numerical value |
|
State Changes Away From |
The state of the data point changes from the Trigger Value assigned. |
ON/OFF |
|
State Changes To |
The state of the data point changes to the Trigger Value assigned. |
ON/OFF |
|
Invalid Value |
The data point returns a value that is not valid. |
None |
|
Valid Value |
The data point returns a value that is valid. |
None. |
|
Is Packet Alarm |
The packet indicates that the data point value is in an alarm state (based on settings at the unit). |
None. |
|
State Change |
The state of the data point changes. |
None. |
|
Changes |
The value of the data point changes. |
None. |
|
Decreases |
The value of the data point decreases. |
None. |
|
Increases |
The value of the data point increases. |
None. |
|
No Change |
The value of the data point does not change. |
None. |