Set DCVG Survey Properties

To set the properties for the current close interval survey, tap File > Properties to display the properties window for the current survey. The following tabs should be configured for a DCVG survey:

• Configure the Survey Tab — the fields in the Survey tab identify the current survey and correspond to PCS ROW Code, Pipeline Code, and Surveyer fields. The Segment field is a required field and must be defined before defining properties in additional tabs or saving the survey file.

• Configure the Modes Tab — the fields in the Modes tab determine whether the survey is a flagged or a fixed increment survey and define the flagged or fixed increment properties.

• Configure the On/Off Tab — the fields in the On/Off tab define the type of survey to be performed and the on and off time settings.

• Configure the DCVG Tab — the fields in the DCVG tab define additional P/S and half-cell calibration settings.

• Configure the Gps Tab — the fields in the Gps tab dictate the frequency at which the GPS location should be recorded and GPS details that are associated with that location record.