Configure the Gps Tab

1. If not already in the Properties window, tap File > Properties to display the survey properties window.

2. Tap the Gps tab.

3. Tap Record GPS Location to include coordinates with survey readings. Tap the drop-down arrow in the Record GPS Location field and select an interval option that identifies how often coordinates are included with readings.

4. Tap Record time of reading to include a GPS time stamp with readings.

5. If you are using a second GPS receiver to record location, complete the following steps:

   1. Tap the drop-down arrow in the Comm port field and select the COM port the GPS receiver is connected to.

   2. Tap the drop-down arrow in the Baudrate field and select a baud rate supported by the GPS receiver.

6. Tap Show message when GPS is lost to show an alert when the GPS signal is not available.

7. Tap Ok to save changes and return to the survey file or tap another tab to set additional properties.