Trimble R2 LED Behavior
The receiver has one LED light. The LED flash rates are:
-
SLOW FLASH = LED is on and off equally for 0.5 seconds.
-
FAST FLASH = LED is on and off equally for 0.1 seconds.
|
Receiver Mode |
Green |
Yellow |
Notes |
|
Off |
off |
off |
|
|
On - healthy power |
on |
— |
|
|
Low power |
— |
fast flash |
|
|
Receiver in monitor mode |
fast flash |
— |
|
|
Receiving corrections |
slow flash |
— |
This pattern is for receiving any corrections, irrespective of the source (for example: radio, TCP, Bluetooth wireless technology). |
|
Receiving corrections and low power |
slow flash |
fast flash |
Green and Yellow flash patterns will alternate every 5 seconds. |
|
Diagnostic On (Green) |
on |
— |
Controlled through TRIMCOMM 91h subcommand 02. |
|
Diagnostic On (Yellow) |
— |
on |
Controlled through TRIMCOMM 91h subcommand 03. |
|
Diagnostic Off |
off |
off |
Controlled through TRIMCOMM 91h subcommand 05. |