Trimble R2 Power Button Functions
The receiver has only one button, the Power button. Press the Power button to turn on or turn off the receiver or to clear the ephemeris file and reset the receiver to factory defaults.
The following table describes how to complete the each of the power button functions.
|
Function |
Action |
LED Behavior |
Notes |
|
Turn off receiver |
Press and hold Power button for more than 2 seconds but less than 15 seconds. |
Green: off after 2 seconds. Yellow: on after 2 seconds and remains on until shutdown is complete. |
|
|
Clear the ephemeris file and reset the receiver to the factory defaults |
Press and hold Power button for more than 15 seconds but less than 30 seconds. |
Green: off after 2 seconds. Yellow: on after 2 seconds and then slow flash after 15 seconds to indicate 15 seconds has elapsed. |
If the button is released, the 15-seconds data is cleared. The yellow flash continues until the operation is complete. The receiver then enters the reboot cycle. |