DVM1110 Specifications

The following general and physical technical specifications are provided for reference when operating the DVM1100 .

If you need to clean the module, wipe it with a dry cloth.

General

Warm-up time: no specified warmup time
Bus type: USB, slave
Altitude: Up to 2,000 m
Working Voltage:
- 250 V maximum between Input/earth ground
- 250 V maximum between COM/earth ground
- 500 mV maximum shunt/COM
Power requirement: +5 V DC, 155 mA typical
Input Impedance: 100 MΩ on primary input | 100 kΩ on shunt input*

*This input has a range and impedance specially designed for measuring shunts more accurately.
Measurement Category: CAT II
Pollution Degree: 1
Ingress protection rating: IP67

Accuracy by Range:

Accuracy by Range
Type	Range	Accuracy**	Temp Coefficient
DC	500 mV 5 V 250 V	± (0.1% + 0.025 mV)† ± (0.1% + 0.001 V)† ± (0.1% + 0.05 V)†	0.007% / °C 0.007% / °C 0.007% / °C
AC	350 mV RMS 3.5 V RMS 175 V RMS	± (1% + 0.105 mV)†† ± (1% + 0.00105 V)†† ± (1% + 0.0525 V)††	N/A N/A N/A

** Accuracy shown is for operation in temperatures from 15°C to 35°C. Annual calibration is required to maintain DVM accuracy.

† DC voltage error increases by 0.1% in the presence of 35 to 100 volts of AC interference.

†† AC voltage accuracy applies to input frequencies of 50 or 60 Hz.

Accuracy Examples:

Accuracy Examples
Type	Signal	Accuracy
DC	100 mV 850 mV 50 V	± 0.13 mV ± 1.9 mV ± 0.1 V
AC	100 mV 850 mV 50 V	± 1.1 mV ± 9.5 mV ± 0.55 V

Physical

Size and Weight:

Physical Dimensions
Type	W (in.)	L (in.)	H (in.)	Weight
DVM2130	2.94	4.44	1.50	134g (4.8oz)
DVM1110	2.88	4.00	1.31