GPS360 Installation

The GPS360 interrupter consumes approximately 120 mA. The built-in solid state relay current consumption is additional 100 V / 80 A max with > 4 s cycle or 100 V / 60 A max with 1 s-4 s cycle. The relay is normally closed.

The GPS360 includes a built-in battery that is used to power the unit if an external power source is unavailable.

The interrupters are set to use Normally Closed relays by default. If you plan to use a Normally Open relay, configure the interrupter prior to installing it.

The GPS360 installation process includes the following steps:

• Installing the GPS360 Interrupter

• Setting Display Contrast

• Viewing GPS Info

• Running a Test Program