Mount on a Metal Pole or Pipe

Some units are shipped with a mounting hardware kit that includes one (1) u-bolt , one (1) bolt, and mounting hardware (4 nuts and 4 washers for the u-bolt). The typical installation is on a free-standing metal pole or pipe using the included mounting hardware kit.

The u-bolt used to mount the unit may be a maximum of 2" on center with 1/4-20. Pipe can be no greater than 1-3/4" OD.

Complete the following steps to install the unit's enclosure on a metal pole or pipe:

  1. Run one u-bolt around the pole, through the pipe bracket, and then through the top of the mounting bracket.

  2. Slide a washer over and thread a nut onto each end of the u-bolt and tighten each nut.

  3. Repeat previous steps for the bottom of the mounting bracket.