Install Satellite Terminal

The RM4010 remote monitoring units are paired with a SkyWave DMR-800 series satellite terminal. The RM4014 and RM4014S units are paired with a SkyWave ST6100 satellite terminal. The terminals can be installed in a similar manner.

  1. Install the satellite terminal on the mounting bracket.

    Satellite Terminal & Mounting Bracket

    Satellite Terminal & Mounting Bracket

  2. Mount the bracket and terminal on a mounting surface, such as a metal pole, using the provided mounting bracket.

  3. Ensure the bracket is set at a 90° angle, with the terminal lying flat (as shown).

    Satellite Terminal on Bracket

  4. Place the GPS antenna on the satellite terminal mounting bracket.

  5. Satellite communication and signal strength can be verified with Bullhorn Tools. Refer to Configuration Overview for more information.