Connect Unit Ground

Complete the following steps to ground the RM4010, RM4014 , or RM4014S to the rectifier frame.

1. Attach ground wire to the ground connection screw (marked or on the unit) .

2. Connect other end of ground wire (green wire in photo) to rectifier frame using spade connectors.

   

   Ground Wire (Green) with Spade Connectors

3. If necessary, use I-beam clamp to secure spade connectors. Remember to remove any paint where the clamp will be attached to the frame.

   

   I-beam Ground Clamp and Spade Connectors for Ground Wire (Green)