Activating Bluetooth

Complete the following steps to activate the unit's Bluetooth to enable it for configuration via a Bluetooth connection.

The unit will disconnect automatically after 10 minutes. It is not necessary to swipe the activation point again unless you wish to de-activate the Bluetooth connection immediately.

  1. Swipe a magnet across the access point on the unit (marked with an arrow on the enclosure. A red light flashes to indicates that the unit is waiting to pair with a Bluetooth-enabled device.

    If you are using Bullhorn Tools on a laptop and connecting to the unit with a USB mini-b cable instead of the Bluetooth connection, you do not need to activate the unit. The unit will be ready to configure with Bullhorn Tools once the cable has been connected to both the unit and the laptop.

    Access Point - Activated

    Access Point - Activated

    The unit will stop waiting to pair (light flashing) after 10 minutes. It is not necessary to swipe the activation point again unless you wish to de-activate the Bluetooth connection immediately.

If using a laptop and Bullhorn Tools software, continue with Configuring with Bullhorn Tools Software. If using the Bullhorn Tools Mobile app, refer to the Bullhorn Tools Mobile User Guide.