Set DCVG Survey Properties

To set the properties for the current DCVG survey, tap File > Properties to display the properties window for the current survey.

DCVG Survey Module - Survey Menu

DCVG Survey Module - Properties Menu

These property settings include the following:

• Properties— segment, date, pipe, tech, run, and other values for the survey.

• Direction — how you can move from record to record, either Ascending or Descending.

• Mode — Fixed Increment or Flagged.

  • Metric: option to set distances in metric values.

  • Monitor Record Count Per Flag: option for Flagged mode only.

• On/Off:

  • On/Off High/Low: for an interrupted survey using non-GPS synchronized interrupters. An On/Off High/low survey will sample 60 times per second and discard the most negative and least negative values in a cycle based on the On/Off Delays. Of the remaining values in the cycle, the most negative value will be on reading and the least negative value will be the off reading.

  • On/Off GPS Sync: for an interrupted survey using GPS synchronized interrupter with shorter on and off intervals.

  • Cycle Begins With sets when the cycle begins (either On or Off) for On/Off GPS Sync or On/Off GPS RT methods.

• GPS — record GPS location, record time of reading, and show message when GPS is lost.