Using the AMXU Pod Setup

If you use the u-blox compatible GPS receiver with the Allegro, complete the following steps to reset the communication parameters of the internal GPS pod:

1. Tap Start > Programs > AMXU Pod Setup to open the AMXU GPS Pod Setup window.

2. Tap the AI button to apply the correct settings for AI applications. Settings are as follows and should match the following image

   

   AMXU GPS Pod Setup

3. Verify the following: 

   The following items must be selected:

   • GGA

   • GSA

   • ZDA

   The following item must be deselected:

   • GPS always on

4. Verify the message Settings Saved displays in the Status box. If the Status box is empty, tap the AI button again to display the message.

5. Tap OK to close the utility.