How to Resolve Connection Issues Between the Allegro QX and Your Computer

If you have problems connecting your Allegro QX to your computer, try the following troubleshooting steps to resolve the problem(s):

  • Verify you are running the latest version of the Allegro QX software. The most recent version is version 7.2.

  • Restart your Allegro QX to ensure the correct services are running.

  • Check all connections between your PC and the Allegro QX device.

    If your Allegro QX is not in a dock, make sure you are using a micro-USB cable that transfers data and that the connections between the computer, the micro-USB cable, and the Allegro QX are secure.

    If your Allegro QX is in a dock, check:

    • The dock is receiving 12 volts with 1.5 amps of power from the charging cable

    • The USB cable has a secure connection to both the PC and the dock

    • The Allegro QX is sitting in the dock securely

  • Enable Advanced Network Functionality on the Allegro QX or, if it's already enabled, disable and then re-enable Advanced Network Functionality.

    Advanced Network Functionality is required when using the Microsoft SMB Protocol.

  • If the computer you are using to connect to the Allegro QX has Windows 10 operating system on it and Windows Mobile Device Center is installed, download and run the WMDC Fixes for Windows 10 installer.

  • If the computer you are using to connect to the Allegro QX doesn't have Windows Mobile Device Center on it, contact AI Support at 1-800-229-3404 for assistance with enabling the Microsoft SMB protocol on your computer.

Was this topic useful? Please email your feedback to us at content@aiworldwide.com.